Digicom COMSPHERE 3911 Podręcznik Użytkownika Strona 144

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 271
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 143
Statistics
6-20
6700-A2-GY31-70
July 1999
The display lists the selected device(s), sorted by the designated field. The
possible fields, depending on the device selected, are as follows:
Local Device Name: The name of the local device associated with the call.
Remote Device Name: The name of the remote device associated with the
call. The information contained in this field is device dependent and is not
available from all devices.
Connect Time: The date and time the call was initiated.
Duration: The length of the call in hours, minutes and seconds.
Line Speed: The baud rate used during the call.
Disconnect Reason: The message reported by the device indicating the
reason the call disconnected or failed. Valid entries are as follows:
Busy Signal: The remote device was busy.
DTR Disconnect: The device disconnected because the DTR dropped.
EC Disconnect: The device disconnected because of the failure to
negotiate the EC mode or because the EC link failed.
Invalid Number: The device was unable to dial because the number was
wrong.
Ln Currnt Disc: The device disconnected due to loss of the line current.
Long Space Disc: The device disconnected because a long space was
detected.
None: Normal local or remote disconnect.
No Answer Tone: The remote device did not answer.
No Carrier Disconnect: The device disconnected because the carrier
was not present.
No Data Disc: The device disconnected because no data was detected.
No Dial-DTR: The device was unable to dial because DTR was off.
No Dial Tone: The device aborted because there was no dial tone.
No Prompt Tone: No prompt tone, such as a credit card proceed tone,
was received.
Rmt Cmnded Disc: The device disconnected due to V.32 Cleardown or
Error Control (EC) disconnect received from the remote end.
Trunk Busy: The device received a Trunk Busy signal.
Przeglądanie stron 143
1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 270 271

Komentarze do niniejszej Instrukcji

Brak uwag